Java 256-битное шифрование на основе пароля AES

мне нужно реализовать 256-битное шифрование AES, но все примеры, которые я нашел в интернете, используют "KeyGenerator" для создания 256-битного ключа, но я хотел бы использовать свой собственный ключ доступа. Как я могу создать свой собственный ключ? Я попытался заполнить его до 256 бит, но затем я получаю сообщение об ошибке, что ключ слишком длинный. У меня установлен патч неограниченной юрисдикции, так что это не проблема:)

Ie. В KeyGenerator выглядит так ...

// Get the KeyGenerator
KeyGenerator kgen = KeyGenerator.getInstance("AES");
kgen.init(128); // 192 and 256 bits may not be available

// Generate the secret key specs.
SecretKey skey = kgen.generateKey();
byte[] raw = skey.getEncoded();

код взят отсюда

редактировать

Я фактически заполнял ПАРОЛЬ до 256 байтов, а не бит, что слишком долго. Ниже приведен некоторый код, который я использую сейчас, когда у меня есть некоторый опыт с этим.

byte[] key = null; // TODO
byte[] input = null; // TODO
byte[] output = null;
SecretKeySpec keySpec = null;
keySpec = new SecretKeySpec(key, "AES");
Cipher cipher = Cipher.getInstance("AES/CBC/PKCS7Padding");
cipher.init(Cipher.ENCRYPT_MODE, keySpec);
output = cipher.doFinal(input)

биты" TODO " вам нужно сделать самостоятельно: -)

9 ответов


поделиться password (a char[]) и salt (a byte[]-8 байт выбран SecureRandom делает хорошую соль, которая не должна храниться в секрете) с получателем вне диапазона. Затем, чтобы получить хороший ключ от этой информации:

/* Derive the key, given password and salt. */
SecretKeyFactory factory = SecretKeyFactory.getInstance("PBKDF2WithHmacSHA256");
KeySpec spec = new PBEKeySpec(password, salt, 65536, 256);
SecretKey tmp = factory.generateSecret(spec);
SecretKey secret = new SecretKeySpec(tmp.getEncoded(), "AES");

магические числа (которые могут быть определены как константы где-то) 65536 и 256 являются ключевым количеством итераций вывода и размером ключа соответственно.

функция вывода ключа повторяется, чтобы потребовать значительного вычислительные усилия, и это мешает злоумышленникам быстро пробовать много разных паролей. Количество итераций может быть изменено в зависимости от доступных вычислительных ресурсов.

размер ключа может быть уменьшен до 128 бит, что по-прежнему считается "сильным" шифрованием, но это не дает большого запаса безопасности, если обнаруживаются атаки, которые ослабляют AES.

используется в режиме правильной цепочки блоков, один и тот же производный ключ может использоваться для шифрования многих сообщений. В CBC, случайный вектор инициализации (IV) генерируется для каждого сообщения, давая Различный шифрованный текст, даже если простой текст идентичен. CBC может быть не самым безопасным режимом, доступным для вас (см. AEAD ниже); есть много других режимов с различными свойствами безопасности, но все они используют аналогичный случайный ввод. В любом случае, выходами каждой операции шифрования является шифрованный текст и вектор инициализации:

/* Encrypt the message. */
Cipher cipher = Cipher.getInstance("AES/CBC/PKCS5Padding");
cipher.init(Cipher.ENCRYPT_MODE, secret);
AlgorithmParameters params = cipher.getParameters();
byte[] iv = params.getParameterSpec(IvParameterSpec.class).getIV();
byte[] ciphertext = cipher.doFinal("Hello, World!".getBytes("UTF-8"));

сохранить ciphertext и iv. При расшифровке SecretKey регенерируется точно так же, используя пароль с теми же параметрами соли и итерации. Инициализируйте шифр с помощью этого ключа и вектор инициализации, сохраненный с сообщением:

/* Decrypt the message, given derived key and initialization vector. */
Cipher cipher = Cipher.getInstance("AES/CBC/PKCS5Padding");
cipher.init(Cipher.DECRYPT_MODE, secret, new IvParameterSpec(iv));
String plaintext = new String(cipher.doFinal(ciphertext), "UTF-8");
System.out.println(plaintext);

Java 7 включает поддержку API для режимов шифрования AEAD, а поставщик" SunJCE", включенный в дистрибутивы OpenJDK и Oracle, реализует их, начиная с Java 8. Один из этих режимов сильно рекомендуется вместо CBC; это защитит целостность данных, а также их конфиденциальность.


A java.security.InvalidKeyException С сообщением "незаконный размер ключа или параметры по умолчанию" означает, что сила криптографии is limited; файлы политики юрисдикции неограниченной силы не находятся в правильном месте. В JDK, они должны быть помещены под ${jdk}/jre/lib/security

на основе описания проблемы, похоже, что файлы политики не правильно установленный. Системы могут легко иметь несколько сред выполнения Java; дважды проверьте, чтобы убедиться, что правильное расположение используется.


рассмотрите возможность использования Spring Security Crypto Module

модуль Spring Security Crypto обеспечивает поддержку симметричного шифрования, генерации ключей и кодирования паролей. Код распространяется как часть основного модуля, но не имеет зависимостей от любого другого кода Spring Security (или Spring).

это обеспечивает простую абстракцию для шифрования и, кажется, соответствует тому, что требуется здесь,

в "стандартный" метод шифрования-256-битный AES с использованием PBKDF2 PKCS #5 (функция вывода ключа на основе пароля #2). Этот метод требует Java 6. Пароль, используемый для создания секретного ключа, должен храниться в безопасном месте и не использоваться совместно. Соль используется для предотвращения атак словаря на ключ в случае, если ваши зашифрованные данные скомпрометированы. Также применяется 16-байтовый случайный вектор инициализации, поэтому каждое зашифрованное сообщение уникально.

посмотреть внутреннее устройство показывает структуру, похожую на Эриксона.

как отмечено в вопросе, для этого также требуется Java Cryptography Extension (JCE) неограниченная сила юрисдикция политика (иначе вы столкнетесь с InvalidKeyException: Illegal Key Size). Это загружаемый для Java 6, Java 7 и Java 8.

пример использования

import org.springframework.security.crypto.encrypt.Encryptors;
import org.springframework.security.crypto.encrypt.TextEncryptor;
import org.springframework.security.crypto.keygen.KeyGenerators;

public class CryptoExample {
    public static void main(String[] args) {
        final String password = "I AM SHERLOCKED";  
        final String salt = KeyGenerators.string().generateKey();

        TextEncryptor encryptor = Encryptors.text(password, salt);      
        System.out.println("Salt: \"" + salt + "\"");

        String textToEncrypt = "*royal secrets*";
        System.out.println("Original text: \"" + textToEncrypt + "\"");

        String encryptedText = encryptor.encrypt(textToEncrypt);
        System.out.println("Encrypted text: \"" + encryptedText + "\"");

        // Could reuse encryptor but wanted to show reconstructing TextEncryptor
        TextEncryptor decryptor = Encryptors.text(password, salt);
        String decryptedText = decryptor.decrypt(encryptedText);
        System.out.println("Decrypted text: \"" + decryptedText + "\"");

        if(textToEncrypt.equals(decryptedText)) {
            System.out.println("Success: decrypted text matches");
        } else {
            System.out.println("Failed: decrypted text does not match");
        }       
    }
}

и образец выход,

Salt: "feacbc02a3a697b0"
Original text: "*royal secrets*"
Encrypted text: "7c73c5a83fa580b5d6f8208768adc931ef3123291ac8bc335a1277a39d256d9a" 
Decrypted text: "*royal secrets*"
Success: decrypted text matches

после прочтения предложений Эриксона и сбора того, что я мог из пары других сообщений и этого примера здесь, Я попытался обновить код дуга с рекомендуемыми изменениями. Не стесняйтесь редактировать, чтобы сделать его лучше.

  • вектор инициализации больше не фиксируется
  • ключ шифрования получен с использованием кода от erickson
  • 8 байтовая соль генерируется в setupEncrypt () с помощью SecureRandom ()
  • дешифрования генерируется из соли шифрования и пароля
  • шифр дешифрования генерируется из ключа дешифрования и вектора инициализации
  • удалено шестигранное вращение вместо org.апаш.commons кодек Хекс подпрограммы

некоторые примечания: это использует 128 - битный ключ шифрования-java, по-видимому, не будет выполнять 256-битное шифрование из коробки. Реализация 256 требует установки некоторых дополнительных файлов в каталог установки java.

кроме того, я не криптограф. Принимать во внимание.

import java.io.File;
import java.io.FileInputStream;
import java.io.FileOutputStream;
import java.io.IOException;
import java.io.UnsupportedEncodingException;
import java.security.AlgorithmParameters;
import java.security.InvalidAlgorithmParameterException;
import java.security.InvalidKeyException;
import java.security.NoSuchAlgorithmException;
import java.security.SecureRandom;
import java.security.spec.InvalidKeySpecException;
import java.security.spec.InvalidParameterSpecException;
import java.security.spec.KeySpec;

import javax.crypto.BadPaddingException;
import javax.crypto.Cipher;
import javax.crypto.CipherInputStream;
import javax.crypto.CipherOutputStream;
import javax.crypto.IllegalBlockSizeException;
import javax.crypto.NoSuchPaddingException;
import javax.crypto.SecretKey;
import javax.crypto.SecretKeyFactory;
import javax.crypto.spec.IvParameterSpec;
import javax.crypto.spec.PBEKeySpec;
import javax.crypto.spec.SecretKeySpec;

import org.apache.commons.codec.DecoderException;
import org.apache.commons.codec.binary.Hex;

public class Crypto
{
    String mPassword = null;
    public final static int SALT_LEN = 8;
    byte [] mInitVec = null;
    byte [] mSalt = null;
    Cipher mEcipher = null;
    Cipher mDecipher = null;
    private final int KEYLEN_BITS = 128; // see notes below where this is used.
    private final int ITERATIONS = 65536;
    private final int MAX_FILE_BUF = 1024;

    /**
     * create an object with just the passphrase from the user. Don't do anything else yet 
     * @param password
     */
    public Crypto (String password)
    {
        mPassword = password;
    }

    /**
     * return the generated salt for this object
     * @return
     */
    public byte [] getSalt ()
    {
        return (mSalt);
    }

    /**
     * return the initialization vector created from setupEncryption
     * @return
     */
    public byte [] getInitVec ()
    {
        return (mInitVec);
    }

    /**
     * debug/print messages
     * @param msg
     */
    private void Db (String msg)
    {
        System.out.println ("** Crypt ** " + msg);
    }

    /**
     * this must be called after creating the initial Crypto object. It creates a salt of SALT_LEN bytes
     * and generates the salt bytes using secureRandom().  The encryption secret key is created 
     * along with the initialization vectory. The member variable mEcipher is created to be used
     * by the class later on when either creating a CipherOutputStream, or encrypting a buffer
     * to be written to disk.
     *  
     * @throws NoSuchAlgorithmException
     * @throws InvalidKeySpecException
     * @throws NoSuchPaddingException
     * @throws InvalidParameterSpecException
     * @throws IllegalBlockSizeException
     * @throws BadPaddingException
     * @throws UnsupportedEncodingException
     * @throws InvalidKeyException
     */
    public void setupEncrypt () throws NoSuchAlgorithmException, 
                                                           InvalidKeySpecException, 
                                                           NoSuchPaddingException, 
                                                           InvalidParameterSpecException, 
                                                           IllegalBlockSizeException, 
                                                           BadPaddingException, 
                                                           UnsupportedEncodingException, 
                                                           InvalidKeyException
    {
        SecretKeyFactory factory = null;
        SecretKey tmp = null;

        // crate secureRandom salt and store  as member var for later use
         mSalt = new byte [SALT_LEN];
        SecureRandom rnd = new SecureRandom ();
        rnd.nextBytes (mSalt);
        Db ("generated salt :" + Hex.encodeHexString (mSalt));

        factory = SecretKeyFactory.getInstance("PBKDF2WithHmacSHA1");

        /* Derive the key, given password and salt. 
         * 
         * in order to do 256 bit crypto, you have to muck with the files for Java's "unlimted security"
         * The end user must also install them (not compiled in) so beware. 
         * see here:  http://www.javamex.com/tutorials/cryptography/unrestricted_policy_files.shtml
         */
        KeySpec spec = new PBEKeySpec (mPassword.toCharArray (), mSalt, ITERATIONS, KEYLEN_BITS);
        tmp = factory.generateSecret (spec);
        SecretKey secret = new SecretKeySpec (tmp.getEncoded(), "AES");

        /* Create the Encryption cipher object and store as a member variable
         */
        mEcipher = Cipher.getInstance ("AES/CBC/PKCS5Padding");
        mEcipher.init (Cipher.ENCRYPT_MODE, secret);
        AlgorithmParameters params = mEcipher.getParameters ();

        // get the initialization vectory and store as member var 
        mInitVec = params.getParameterSpec (IvParameterSpec.class).getIV();

        Db ("mInitVec is :" + Hex.encodeHexString (mInitVec));
    }



    /**
     * If a file is being decrypted, we need to know the pasword, the salt and the initialization vector (iv). 
     * We have the password from initializing the class. pass the iv and salt here which is
     * obtained when encrypting the file initially.
     *   
     * @param initvec
     * @param salt
     * @throws NoSuchAlgorithmException
     * @throws InvalidKeySpecException
     * @throws NoSuchPaddingException
     * @throws InvalidKeyException
     * @throws InvalidAlgorithmParameterException
     * @throws DecoderException
     */
    public void setupDecrypt (String initvec, String salt) throws NoSuchAlgorithmException, 
                                                                                       InvalidKeySpecException, 
                                                                                       NoSuchPaddingException, 
                                                                                       InvalidKeyException, 
                                                                                       InvalidAlgorithmParameterException, 
                                                                                       DecoderException
    {
        SecretKeyFactory factory = null;
        SecretKey tmp = null;
        SecretKey secret = null;

        // since we pass it as a string of input, convert to a actual byte buffer here
        mSalt = Hex.decodeHex (salt.toCharArray ());
       Db ("got salt " + Hex.encodeHexString (mSalt));

        // get initialization vector from passed string
        mInitVec = Hex.decodeHex (initvec.toCharArray ());
        Db ("got initvector :" + Hex.encodeHexString (mInitVec));


        /* Derive the key, given password and salt. */
        // in order to do 256 bit crypto, you have to muck with the files for Java's "unlimted security"
        // The end user must also install them (not compiled in) so beware. 
        // see here: 
      // http://www.javamex.com/tutorials/cryptography/unrestricted_policy_files.shtml
        factory = SecretKeyFactory.getInstance("PBKDF2WithHmacSHA1");
        KeySpec spec = new PBEKeySpec(mPassword.toCharArray (), mSalt, ITERATIONS, KEYLEN_BITS);

        tmp = factory.generateSecret(spec);
        secret = new SecretKeySpec(tmp.getEncoded(), "AES");

        /* Decrypt the message, given derived key and initialization vector. */
        mDecipher = Cipher.getInstance("AES/CBC/PKCS5Padding");
        mDecipher.init(Cipher.DECRYPT_MODE, secret, new IvParameterSpec(mInitVec));
    }


    /**
     * This is where we write out the actual encrypted data to disk using the Cipher created in setupEncrypt().
     * Pass two file objects representing the actual input (cleartext) and output file to be encrypted.
     * 
     * there may be a way to write a cleartext header to the encrypted file containing the salt, but I ran
     * into uncertain problems with that. 
     *  
     * @param input - the cleartext file to be encrypted
     * @param output - the encrypted data file
     * @throws IOException
     * @throws IllegalBlockSizeException
     * @throws BadPaddingException
     */
    public void WriteEncryptedFile (File input, File output) throws 
                                                                                          IOException, 
                                                                                          IllegalBlockSizeException, 
                                                                                          BadPaddingException
    {
        FileInputStream fin;
        FileOutputStream fout;
        long totalread = 0;
        int nread = 0;
        byte [] inbuf = new byte [MAX_FILE_BUF];

        fout = new FileOutputStream (output);
        fin = new FileInputStream (input);

        while ((nread = fin.read (inbuf)) > 0 )
        {
            Db ("read " + nread + " bytes");
            totalread += nread;

            // create a buffer to write with the exact number of bytes read. Otherwise a short read fills inbuf with 0x0
            // and results in full blocks of MAX_FILE_BUF being written. 
            byte [] trimbuf = new byte [nread];
            for (int i = 0; i < nread; i++)
                trimbuf[i] = inbuf[i];

            // encrypt the buffer using the cipher obtained previosly
            byte [] tmp = mEcipher.update (trimbuf);

            // I don't think this should happen, but just in case..
            if (tmp != null)
                fout.write (tmp);
        }

        // finalize the encryption since we've done it in blocks of MAX_FILE_BUF
        byte [] finalbuf = mEcipher.doFinal ();
        if (finalbuf != null)
            fout.write (finalbuf);

        fout.flush();
        fin.close();
        fout.close();
        fout.close ();

        Db ("wrote " + totalread + " encrypted bytes");
    }


    /**
     * Read from the encrypted file (input) and turn the cipher back into cleartext. Write the cleartext buffer back out
     * to disk as (output) File.
     * 
     * I left CipherInputStream in here as a test to see if I could mix it with the update() and final() methods of encrypting
     *  and still have a correctly decrypted file in the end. Seems to work so left it in.
     *  
     * @param input - File object representing encrypted data on disk 
     * @param output - File object of cleartext data to write out after decrypting
     * @throws IllegalBlockSizeException
     * @throws BadPaddingException
     * @throws IOException
     */
    public void ReadEncryptedFile (File input, File output) throws 
                                                                                                                                            IllegalBlockSizeException, 
                                                                                                                                            BadPaddingException, 
                                                                                                                                            IOException
    {
        FileInputStream fin; 
        FileOutputStream fout;
        CipherInputStream cin;
        long totalread = 0;
        int nread = 0;
        byte [] inbuf = new byte [MAX_FILE_BUF];

        fout = new FileOutputStream (output);
        fin = new FileInputStream (input);

        // creating a decoding stream from the FileInputStream above using the cipher created from setupDecrypt()
        cin = new CipherInputStream (fin, mDecipher);

        while ((nread = cin.read (inbuf)) > 0 )
        {
            Db ("read " + nread + " bytes");
            totalread += nread;

            // create a buffer to write with the exact number of bytes read. Otherwise a short read fills inbuf with 0x0
            byte [] trimbuf = new byte [nread];
            for (int i = 0; i < nread; i++)
                trimbuf[i] = inbuf[i];

            // write out the size-adjusted buffer
            fout.write (trimbuf);
        }

        fout.flush();
        cin.close();
        fin.close ();       
        fout.close();   

        Db ("wrote " + totalread + " encrypted bytes");
    }


    /**
     * adding main() for usage demonstration. With member vars, some of the locals would not be needed
     */
    public static void main(String [] args)
    {

        // create the input.txt file in the current directory before continuing
        File input = new File ("input.txt");
        File eoutput = new File ("encrypted.aes");
        File doutput = new File ("decrypted.txt");
        String iv = null;
        String salt = null;
        Crypto en = new Crypto ("mypassword");

        /*
         * setup encryption cipher using password. print out iv and salt
         */
        try
      {
          en.setupEncrypt ();
          iv = Hex.encodeHexString (en.getInitVec ()).toUpperCase ();
          salt = Hex.encodeHexString (en.getSalt ()).toUpperCase ();
      }
      catch (InvalidKeyException e)
      {
          e.printStackTrace();
      }
      catch (NoSuchAlgorithmException e)
      {
          e.printStackTrace();
      }
      catch (InvalidKeySpecException e)
      {
          e.printStackTrace();
      }
      catch (NoSuchPaddingException e)
      {
          e.printStackTrace();
      }
      catch (InvalidParameterSpecException e)
      {
          e.printStackTrace();
      }
      catch (IllegalBlockSizeException e)
      {
          e.printStackTrace();
      }
      catch (BadPaddingException e)
      {
          e.printStackTrace();
      }
      catch (UnsupportedEncodingException e)
      {
          e.printStackTrace();
      }

        /*
         * write out encrypted file
         */
        try
      {
          en.WriteEncryptedFile (input, eoutput);
          System.out.printf ("File encrypted to " + eoutput.getName () + "\niv:" + iv + "\nsalt:" + salt + "\n\n");
      }
      catch (IllegalBlockSizeException e)
      {
          e.printStackTrace();
      }
      catch (BadPaddingException e)
      {
          e.printStackTrace();
      }
      catch (IOException e)
      {
          e.printStackTrace();
      }


        /*
         * decrypt file
         */
        Crypto dc = new Crypto ("mypassword");
        try
      {
          dc.setupDecrypt (iv, salt);
      }
      catch (InvalidKeyException e)
      {
          e.printStackTrace();
      }
      catch (NoSuchAlgorithmException e)
      {
          e.printStackTrace();
      }
      catch (InvalidKeySpecException e)
      {
          e.printStackTrace();
      }
      catch (NoSuchPaddingException e)
      {
          e.printStackTrace();
      }
      catch (InvalidAlgorithmParameterException e)
      {
          e.printStackTrace();
      }
      catch (DecoderException e)
      {
          e.printStackTrace();
      }

        /*
         * write out decrypted file
         */
        try
      {
          dc.ReadEncryptedFile (eoutput, doutput);
          System.out.println ("decryption finished to " + doutput.getName ());
      }
      catch (IllegalBlockSizeException e)
      {
          e.printStackTrace();
      }
      catch (BadPaddingException e)
      {
          e.printStackTrace();
      }
      catch (IOException e)
      {
          e.printStackTrace();
      }
   }


}

я реализовал ответ Эриксона в очень простом классе:
Java AES 256-битный класс шифрования / дешифрования

Если вы получите java.security.InvalidKeyException вы должны установить Java Cryptography Extension (JCE) неограниченное количество файлов политики юрисдикции силы:

просто поместите банки в свой {JDK HOME}\jre\lib\security


создание собственного ключа из массива байтов легко:

byte[] raw = ...; // 32 bytes in size for a 256 bit key
Key skey = new javax.crypto.spec.SecretKeySpec(raw, "AES");

но создание 256-битного ключа недостаточно. Если генератор ключей не может генерировать 256-битные ключи, то Cipher класс, вероятно, также не поддерживает AES 256-бит. Вы говорите, что у вас установлен патч неограниченной юрисдикции, поэтому шифр AES-256 должен поддерживаться (но тогда 256-битные ключи тоже должны быть, поэтому это может быть проблемой конфигурации).

Cipher cipher = Cipher.getInstance("AES");
cipher.init(Cipher.ENCRYPT_MODE, skey);
byte[] encrypted = cipher.doFinal(plainText.getBytes());

временное решение из-за отсутствия поддержки AES-256 необходимо взять некоторую свободно доступную реализацию AES-256 и использовать ее в качестве пользовательского поставщика. Это включает в себя создание собственного Provider подкласс и использовать его с Cipher.getInstance(String, Provider). Но это может быть сложный процесс.


то, что я делал в прошлом, - это хэш ключа через что-то вроде SHA256, а затем извлеките байты из хэша в ключевой байт[].

после того, как у вас есть байт [], вы можете просто сделать:

SecretKeySpec key = new SecretKeySpec(keyBytes, "AES");
Cipher cipher = Cipher.getInstance("AES");
cipher.init(Cipher.ENCRYPT_MODE, key);
byte[] encryptedBytes = cipher.doFinal(clearText.getBytes());

добавление в изменения @Wufoo, следующая версия использует InputStreams, а не файлы, чтобы сделать работу с различными файлами проще. Он также хранит IV и соль в начале файла, что делает его так только пароль должен быть отслежен. Поскольку капельница и соль не должны быть секретными, это делает жизнь немного легче.

import java.io.File;
import java.io.FileInputStream;
import java.io.FileOutputStream;
import java.io.IOException;

import java.security.AlgorithmParameters;
import java.security.InvalidKeyException;
import java.security.NoSuchAlgorithmException;
import java.security.SecureRandom;
import java.security.spec.InvalidKeySpecException;
import java.security.spec.InvalidParameterSpecException;
import java.security.spec.KeySpec;

import java.util.logging.Level;
import java.util.logging.Logger;

import javax.crypto.BadPaddingException;
import javax.crypto.Cipher;
import javax.crypto.CipherInputStream;
import javax.crypto.IllegalBlockSizeException;
import javax.crypto.NoSuchPaddingException;
import javax.crypto.SecretKey;
import javax.crypto.SecretKeyFactory;
import javax.crypto.spec.IvParameterSpec;
import javax.crypto.spec.PBEKeySpec;
import javax.crypto.spec.SecretKeySpec;

public class AES {
    public final static int SALT_LEN     = 8;
    static final String     HEXES        = "0123456789ABCDEF";
    String                  mPassword    = null;
    byte[]                  mInitVec     = null;
    byte[]                  mSalt        = new byte[SALT_LEN];
    Cipher                  mEcipher     = null;
    Cipher                  mDecipher    = null;
    private final int       KEYLEN_BITS  = 128;    // see notes below where this is used.
    private final int       ITERATIONS   = 65536;
    private final int       MAX_FILE_BUF = 1024;

    /**
     * create an object with just the passphrase from the user. Don't do anything else yet
     * @param password
     */
    public AES(String password) {
        mPassword = password;
    }

    public static String byteToHex(byte[] raw) {
        if (raw == null) {
            return null;
        }

        final StringBuilder hex = new StringBuilder(2 * raw.length);

        for (final byte b : raw) {
            hex.append(HEXES.charAt((b & 0xF0) >> 4)).append(HEXES.charAt((b & 0x0F)));
        }

        return hex.toString();
    }

    public static byte[] hexToByte(String hexString) {
        int    len = hexString.length();
        byte[] ba  = new byte[len / 2];

        for (int i = 0; i < len; i += 2) {
            ba[i / 2] = (byte) ((Character.digit(hexString.charAt(i), 16) << 4)
                                + Character.digit(hexString.charAt(i + 1), 16));
        }

        return ba;
    }

    /**
     * debug/print messages
     * @param msg
     */
    private void Db(String msg) {
        System.out.println("** Crypt ** " + msg);
    }

    /**
     * This is where we write out the actual encrypted data to disk using the Cipher created in setupEncrypt().
     * Pass two file objects representing the actual input (cleartext) and output file to be encrypted.
     *
     * there may be a way to write a cleartext header to the encrypted file containing the salt, but I ran
     * into uncertain problems with that.
     *
     * @param input - the cleartext file to be encrypted
     * @param output - the encrypted data file
     * @throws IOException
     * @throws IllegalBlockSizeException
     * @throws BadPaddingException
     */
    public void WriteEncryptedFile(InputStream inputStream, OutputStream outputStream)
            throws IOException, IllegalBlockSizeException, BadPaddingException {
        try {
            long             totalread = 0;
            int              nread     = 0;
            byte[]           inbuf     = new byte[MAX_FILE_BUF];
            SecretKeyFactory factory   = null;
            SecretKey        tmp       = null;

            // crate secureRandom salt and store  as member var for later use
            mSalt = new byte[SALT_LEN];

            SecureRandom rnd = new SecureRandom();

            rnd.nextBytes(mSalt);
            Db("generated salt :" + byteToHex(mSalt));
            factory = SecretKeyFactory.getInstance("PBKDF2WithHmacSHA1");

            /*
             *  Derive the key, given password and salt.
             *
             * in order to do 256 bit crypto, you have to muck with the files for Java's "unlimted security"
             * The end user must also install them (not compiled in) so beware.
             * see here:  http://www.javamex.com/tutorials/cryptography/unrestricted_policy_files.shtml
             */
            KeySpec spec = new PBEKeySpec(mPassword.toCharArray(), mSalt, ITERATIONS, KEYLEN_BITS);

            tmp = factory.generateSecret(spec);

            SecretKey secret = new SecretKeySpec(tmp.getEncoded(), "AES");

            /*
             *  Create the Encryption cipher object and store as a member variable
             */
            mEcipher = Cipher.getInstance("AES/CBC/PKCS5Padding");
            mEcipher.init(Cipher.ENCRYPT_MODE, secret);

            AlgorithmParameters params = mEcipher.getParameters();

            // get the initialization vectory and store as member var
            mInitVec = params.getParameterSpec(IvParameterSpec.class).getIV();
            Db("mInitVec is :" + byteToHex(mInitVec));
            outputStream.write(mSalt);
            outputStream.write(mInitVec);

            while ((nread = inputStream.read(inbuf)) > 0) {
                Db("read " + nread + " bytes");
                totalread += nread;

                // create a buffer to write with the exact number of bytes read. Otherwise a short read fills inbuf with 0x0
                // and results in full blocks of MAX_FILE_BUF being written.
                byte[] trimbuf = new byte[nread];

                for (int i = 0; i < nread; i++) {
                    trimbuf[i] = inbuf[i];
                }

                // encrypt the buffer using the cipher obtained previosly
                byte[] tmpBuf = mEcipher.update(trimbuf);

                // I don't think this should happen, but just in case..
                if (tmpBuf != null) {
                    outputStream.write(tmpBuf);
                }
            }

            // finalize the encryption since we've done it in blocks of MAX_FILE_BUF
            byte[] finalbuf = mEcipher.doFinal();

            if (finalbuf != null) {
                outputStream.write(finalbuf);
            }

            outputStream.flush();
            inputStream.close();
            outputStream.close();
            outputStream.close();
            Db("wrote " + totalread + " encrypted bytes");
        } catch (InvalidKeyException ex) {
            Logger.getLogger(AES.class.getName()).log(Level.SEVERE, null, ex);
        } catch (InvalidParameterSpecException ex) {
            Logger.getLogger(AES.class.getName()).log(Level.SEVERE, null, ex);
        } catch (NoSuchAlgorithmException ex) {
            Logger.getLogger(AES.class.getName()).log(Level.SEVERE, null, ex);
        } catch (NoSuchPaddingException ex) {
            Logger.getLogger(AES.class.getName()).log(Level.SEVERE, null, ex);
        } catch (InvalidKeySpecException ex) {
            Logger.getLogger(AES.class.getName()).log(Level.SEVERE, null, ex);
        }
    }

    /**
     * Read from the encrypted file (input) and turn the cipher back into cleartext. Write the cleartext buffer back out
     * to disk as (output) File.
     *
     * I left CipherInputStream in here as a test to see if I could mix it with the update() and final() methods of encrypting
     *  and still have a correctly decrypted file in the end. Seems to work so left it in.
     *
     * @param input - File object representing encrypted data on disk
     * @param output - File object of cleartext data to write out after decrypting
     * @throws IllegalBlockSizeException
     * @throws BadPaddingException
     * @throws IOException
     */
    public void ReadEncryptedFile(InputStream inputStream, OutputStream outputStream)
            throws IllegalBlockSizeException, BadPaddingException, IOException {
        try {
            CipherInputStream cin;
            long              totalread = 0;
            int               nread     = 0;
            byte[]            inbuf     = new byte[MAX_FILE_BUF];

            // Read the Salt
            inputStream.read(this.mSalt);
            Db("generated salt :" + byteToHex(mSalt));

            SecretKeyFactory factory = null;
            SecretKey        tmp     = null;
            SecretKey        secret  = null;

            factory = SecretKeyFactory.getInstance("PBKDF2WithHmacSHA1");

            KeySpec spec = new PBEKeySpec(mPassword.toCharArray(), mSalt, ITERATIONS, KEYLEN_BITS);

            tmp    = factory.generateSecret(spec);
            secret = new SecretKeySpec(tmp.getEncoded(), "AES");

            /* Decrypt the message, given derived key and initialization vector. */
            mDecipher = Cipher.getInstance("AES/CBC/PKCS5Padding");

            // Set the appropriate size for mInitVec by Generating a New One
            AlgorithmParameters params = mDecipher.getParameters();

            mInitVec = params.getParameterSpec(IvParameterSpec.class).getIV();

            // Read the old IV from the file to mInitVec now that size is set.
            inputStream.read(this.mInitVec);
            Db("mInitVec is :" + byteToHex(mInitVec));
            mDecipher.init(Cipher.DECRYPT_MODE, secret, new IvParameterSpec(mInitVec));

            // creating a decoding stream from the FileInputStream above using the cipher created from setupDecrypt()
            cin = new CipherInputStream(inputStream, mDecipher);

            while ((nread = cin.read(inbuf)) > 0) {
                Db("read " + nread + " bytes");
                totalread += nread;

                // create a buffer to write with the exact number of bytes read. Otherwise a short read fills inbuf with 0x0
                byte[] trimbuf = new byte[nread];

                for (int i = 0; i < nread; i++) {
                    trimbuf[i] = inbuf[i];
                }

                // write out the size-adjusted buffer
                outputStream.write(trimbuf);
            }

            outputStream.flush();
            cin.close();
            inputStream.close();
            outputStream.close();
            Db("wrote " + totalread + " encrypted bytes");
        } catch (Exception ex) {
            Logger.getLogger(AES.class.getName()).log(Level.SEVERE, null, ex);
        }
    }

    /**
     * adding main() for usage demonstration. With member vars, some of the locals would not be needed
     */
    public static void main(String[] args) {

        // create the input.txt file in the current directory before continuing
        File   input   = new File("input.txt");
        File   eoutput = new File("encrypted.aes");
        File   doutput = new File("decrypted.txt");
        String iv      = null;
        String salt    = null;
        AES    en      = new AES("mypassword");

        /*
         * write out encrypted file
         */
        try {
            en.WriteEncryptedFile(new FileInputStream(input), new FileOutputStream(eoutput));
            System.out.printf("File encrypted to " + eoutput.getName() + "\niv:" + iv + "\nsalt:" + salt + "\n\n");
        } catch (IllegalBlockSizeException | BadPaddingException | IOException e) {
            e.printStackTrace();
        }

        /*
         * decrypt file
         */
        AES dc = new AES("mypassword");

        /*
         * write out decrypted file
         */
        try {
            dc.ReadEncryptedFile(new FileInputStream(eoutput), new FileOutputStream(doutput));
            System.out.println("decryption finished to " + doutput.getName());
        } catch (IllegalBlockSizeException | BadPaddingException | IOException e) {
            e.printStackTrace();
        }
    }
}

использовать этот класс для шифрования. Это работает.

public class ObjectCrypter {


public static byte[] encrypt(byte[] ivBytes, byte[] keyBytes, byte[] mes) 
        throws NoSuchAlgorithmException,
        NoSuchPaddingException,
        InvalidKeyException,
        InvalidAlgorithmParameterException,
        IllegalBlockSizeException,
        BadPaddingException, IOException {

    AlgorithmParameterSpec ivSpec = new IvParameterSpec(ivBytes);
    SecretKeySpec newKey = new SecretKeySpec(keyBytes, "AES");
    Cipher cipher = null;
    cipher = Cipher.getInstance("AES/CBC/PKCS5Padding");
    cipher.init(Cipher.ENCRYPT_MODE, newKey, ivSpec);
    return  cipher.doFinal(mes);

}

public static byte[] decrypt(byte[] ivBytes, byte[] keyBytes, byte[] bytes) 
        throws NoSuchAlgorithmException,
        NoSuchPaddingException,
        InvalidKeyException,
        InvalidAlgorithmParameterException,
        IllegalBlockSizeException,
        BadPaddingException, IOException, ClassNotFoundException {

    AlgorithmParameterSpec ivSpec = new IvParameterSpec(ivBytes);
    SecretKeySpec newKey = new SecretKeySpec(keyBytes, "AES");
    Cipher cipher = Cipher.getInstance("AES/CBC/PKCS5Padding");
    cipher.init(Cipher.DECRYPT_MODE, newKey, ivSpec);
    return  cipher.doFinal(bytes);

}

}

и это ivBytes и случайный ключ;

String key = "e8ffc7e56311679f12b6fc91aa77a5eb";

byte[] ivBytes = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
keyBytes = key.getBytes("UTF-8");

рассмотрите возможность использования Encryptor4j

сначала убедитесь, что у вас есть Неограниченная Сила Юрисдикционная Политика файлы, установленные перед вашим продолжить, так что вы можете использовать 256-битные ключи AES.

затем сделайте следующее:

String password = "mysupersecretpassword"; 
Key key = KeyFactory.AES.keyFromPassword(password.toCharArray());
Encryptor encryptor = new Encryptor(key, "AES/CBC/PKCS7Padding", 16);

теперь вы можете использовать шифрование, чтобы зашифровать сообщение. Вы также можете выполнить потоковое шифрование, если хотите. Он автоматически генерирует и добавляет безопасный IV для вашего удобства.

Если это файл, который вы хотите сжать взгляните на этот ответ шифрование большого файла с помощью AES с помощью JAVA для еще более простой подход.