Как я могу читать и анализировать CSV-файлы на C++?

Мне нужно загрузить и использовать данные CSV-файла на C++. На данный момент это может быть просто парсер с разделителями-запятыми (т. е. не беспокойтесь о выходе из новых строк и запятых). Основная потребность-это построчный синтаксический анализатор, который будет возвращать вектор для следующей строки при каждом вызове метода.

Я нашел эту статью, которая выглядит весьма перспективным: http://www.boost.org/doc/libs/1_35_0/libs/spirit/example/fundamental/list_parser.cpp

Я никогда не использовал Boost Дух, но я готов попробовать. Но только если нет более простого решения, которое я упускаю из виду.

30 ответов


Если вы не заботитесь о побеге запятой и новой строки,
И вы не можете вставлять запятую и новую строку в кавычки (если вы не можете избежать этого...)
тогда его только около трех строк кода (OK 14 ->, но его только 15, чтобы прочитать весь файл).

std::vector<std::string> getNextLineAndSplitIntoTokens(std::istream& str)
{
    std::vector<std::string>   result;
    std::string                line;
    std::getline(str,line);

    std::stringstream          lineStream(line);
    std::string                cell;

    while(std::getline(lineStream,cell, ','))
    {
        result.push_back(cell);
    }
    // This checks for a trailing comma with no data after it.
    if (!lineStream && cell.empty())
    {
        // If there was a trailing comma then add an empty element.
        result.push_back("");
    }
    return result;
}

Я бы просто создать класс, представляющий строку.
Затем поток в этот объект:

#include <iterator>
#include <iostream>
#include <fstream>
#include <sstream>
#include <vector>
#include <string>

class CSVRow
{
    public:
        std::string const& operator[](std::size_t index) const
        {
            return m_data[index];
        }
        std::size_t size() const
        {
            return m_data.size();
        }
        void readNextRow(std::istream& str)
        {
            std::string         line;
            std::getline(str, line);

            std::stringstream   lineStream(line);
            std::string         cell;

            m_data.clear();
            while(std::getline(lineStream, cell, ','))
            {
                m_data.push_back(cell);
            }
            // This checks for a trailing comma with no data after it.
            if (!lineStream && cell.empty())
            {
                // If there was a trailing comma then add an empty element.
                m_data.push_back("");
            }
        }
    private:
        std::vector<std::string>    m_data;
};

std::istream& operator>>(std::istream& str, CSVRow& data)
{
    data.readNextRow(str);
    return str;
}   
int main()
{
    std::ifstream       file("plop.csv");

    CSVRow              row;
    while(file >> row)
    {
        std::cout << "4th Element(" << row[3] << ")\n";
    }
}

но с небольшой работой мы могли бы технически создать итератор:

class CSVIterator
{   
    public:
        typedef std::input_iterator_tag     iterator_category;
        typedef CSVRow                      value_type;
        typedef std::size_t                 difference_type;
        typedef CSVRow*                     pointer;
        typedef CSVRow&                     reference;

        CSVIterator(std::istream& str)  :m_str(str.good()?&str:NULL) { ++(*this); }
        CSVIterator()                   :m_str(NULL) {}

        // Pre Increment
        CSVIterator& operator++()               {if (m_str) { if (!((*m_str) >> m_row)){m_str = NULL;}}return *this;}
        // Post increment
        CSVIterator operator++(int)             {CSVIterator    tmp(*this);++(*this);return tmp;}
        CSVRow const& operator*()   const       {return m_row;}
        CSVRow const* operator->()  const       {return &m_row;}

        bool operator==(CSVIterator const& rhs) {return ((this == &rhs) || ((this->m_str == NULL) && (rhs.m_str == NULL)));}
        bool operator!=(CSVIterator const& rhs) {return !((*this) == rhs);}
    private:
        std::istream*       m_str;
        CSVRow              m_row;
};


int main()
{
    std::ifstream       file("plop.csv");

    for(CSVIterator loop(file); loop != CSVIterator(); ++loop)
    {
        std::cout << "4th Element(" << (*loop)[3] << ")\n";
    }
}

решение с помощью Boost Tokenizer:

std::vector<std::string> vec;
using namespace boost;
tokenizer<escaped_list_separator<char> > tk(
   line, escaped_list_separator<char>('\', ',', '\"'));
for (tokenizer<escaped_list_separator<char> >::iterator i(tk.begin());
   i!=tk.end();++i) 
{
   vec.push_back(*i);
}

на Библиотека Инструментария Строк C++ (StrTk) имеет класс сетки токенов, который позволяет загружать данные либо из текстовые файлы, строки или char буферов, и анализировать / обрабатывать их в виде строки-столбца.

вы можете указать разделители строк и столбцов или просто использовать значения по умолчанию.

void foo()
{
   std::string data = "1,2,3,4,5\n"
                      "0,2,4,6,8\n"
                      "1,3,5,7,9\n";

   strtk::token_grid grid(data,data.size(),",");

   for(std::size_t i = 0; i < grid.row_count(); ++i)
   {
      strtk::token_grid::row_type r = grid.row(i);
      for(std::size_t j = 0; j < r.size(); ++j)
      {
         std::cout << r.get<int>(j) << "\t";
      }
      std::cout << std::endl;
   }
   std::cout << std::endl;
}

больше примеров можно найти здесь


моя версия не использует ничего, кроме стандартной библиотеки C++11. Он хорошо справляется с цитатой Excel CSV:

spam eggs,"foo,bar","""fizz buzz"""
1.23,4.567,-8.00E+09

код записывается как конечный автомат и потребляет по одному символу за раз. Я думаю, что так проще рассуждать.

#include <istream>
#include <string>
#include <vector>

enum class CSVState {
    UnquotedField,
    QuotedField,
    QuotedQuote
};

std::vector<std::string> readCSVRow(const std::string &row) {
    CSVState state = CSVState::UnquotedField;
    std::vector<std::string> fields {""};
    size_t i = 0; // index of the current field
    for (char c : row) {
        switch (state) {
            case CSVState::UnquotedField:
                switch (c) {
                    case ',': // end of field
                              fields.push_back(""); i++;
                              break;
                    case '"': state = CSVState::QuotedField;
                              break;
                    default:  fields[i].push_back(c);
                              break; }
                break;
            case CSVState::QuotedField:
                switch (c) {
                    case '"': state = CSVState::QuotedQuote;
                              break;
                    default:  fields[i].push_back(c);
                              break; }
                break;
            case CSVState::QuotedQuote:
                switch (c) {
                    case ',': // , after closing quote
                              fields.push_back(""); i++;
                              state = CSVState::UnquotedField;
                              break;
                    case '"': // "" -> "
                              fields[i].push_back('"');
                              state = CSVState::QuotedField;
                              break;
                    default:  // end of quote
                              state = CSVState::UnquotedField;
                              break; }
                break;
        }
    }
    return fields;
}

/// Read CSV file, Excel dialect. Accept "quoted fields ""with quotes"""
std::vector<std::vector<std::string>> readCSV(std::istream &in) {
    std::vector<std::vector<std::string>> table;
    std::string row;
    while (!in.eof()) {
        std::getline(in, row);
        if (in.bad() || in.fail()) {
            break;
        }
        auto fields = readCSVRow(row);
        table.push_back(fields);
    }
    return table;
}

вы можете использовать Boost Tokenizer с escaped_list_separator.

escaped_list_separator анализирует надмножество csv. Boost:: tokenizer

Это использует только файлы заголовков Boost tokenizer, никаких ссылок на библиотеки boost не требуется.

вот пример, (см. разбор CSV-файла с помощью Boost Tokenizer в C++ или Boost::tokenizer ):

#include <iostream>     // cout, endl
#include <fstream>      // fstream
#include <vector>
#include <string>
#include <algorithm>    // copy
#include <iterator>     // ostream_operator
#include <boost/tokenizer.hpp>

int main()
{
    using namespace std;
    using namespace boost;
    string data("data.csv");

    ifstream in(data.c_str());
    if (!in.is_open()) return 1;

    typedef tokenizer< escaped_list_separator<char> > Tokenizer;
    vector< string > vec;
    string line;

    while (getline(in,line))
    {
        Tokenizer tok(line);
        vec.assign(tok.begin(),tok.end());

        // vector now contains strings from one row, output to cout here
        copy(vec.begin(), vec.end(), ostream_iterator<string>(cout, "|"));

        cout << "\n----------------------" << endl;
    }
}

использование Spirit для разбора CSV не является излишним. Spirit хорошо подходит для микро-разбора задач. Например, с Spirit 2.1 это так же просто, как:

bool r = phrase_parse(first, last,

    //  Begin grammar
    (
        double_ % ','
    )
    ,
    //  End grammar

    space, v);

вектор v заполняется значениями. существует ряд учебных пособий касаясь этого в новых документах Spirit 2.1, которые только что были выпущены с Boost 1.41.

учебник прогрессирует от простого к сложному. Парсеры CSV представлены где-то посередине и касаются различные техники использования Духа. Сгенерированный код такой же жесткий, как рукописный. Проверьте ассемблер автоматически!


Если вы DO позаботьтесь о правильном разборе CSV, это сделает это...относительно медленно, поскольку он работает по одному char за раз.

 void ParseCSV(const string& csvSource, vector<vector<string> >& lines)
    {
       bool inQuote(false);
       bool newLine(false);
       string field;
       lines.clear();
       vector<string> line;

       string::const_iterator aChar = csvSource.begin();
       while (aChar != csvSource.end())
       {
          switch (*aChar)
          {
          case '"':
             newLine = false;
             inQuote = !inQuote;
             break;

          case ',':
             newLine = false;
             if (inQuote == true)
             {
                field += *aChar;
             }
             else
             {
                line.push_back(field);
                field.clear();
             }
             break;

          case '\n':
          case '\r':
             if (inQuote == true)
             {
                field += *aChar;
             }
             else
             {
                if (newLine == false)
                {
                   line.push_back(field);
                   lines.push_back(line);
                   field.clear();
                   line.clear();
                   newLine = true;
                }
             }
             break;

          default:
             newLine = false;
             field.push_back(*aChar);
             break;
          }

          aChar++;
       }

       if (field.size())
          line.push_back(field);

       if (line.size())
          lines.push_back(line);
    }

при использовании Boost Tokenizer escaped_list_separator для CSV-файлов следует знать следующее:

  1. требуется escape-символ (по умолчанию back-slash - \)
  2. для этого требуется символ разделителя / разделителя (запятая по умолчанию)
  3. для этого требуется символ цитаты (цитата по умолчанию - ")

формат CSV, указанный wiki, утверждает, что поля данных могут содержать разделители в кавычках (поддерживается):

1997, Ford, E350, "супер, роскошный грузовик"

формат CSV, указанный wiki, гласит, что одинарные кавычки должны обрабатываться двойными кавычками (escaped_list_separator удалит все символы кавычек):

1997, Ford, E350, "супер ""роскошный ""грузовик"

формат CSV не указывает, что любые символы обратной косой черты должны быть удалены (escaped_list_separator удалит все escape письмена.)

возможная работа, чтобы исправить поведение по умолчанию boost escaped_list_separator:

  1. сначала замените все символы обратной косой черты ( \ ) двумя символами обратной косой черты ( \ \ ), чтобы они не были удалены.
  2. во-вторых, замените все двойные кавычки ( "" ) одним символом обратной косой черты и кавычкой (\")

эта работа имеет побочный эффект, что пустые поля данных, которые представлены двойной кавычкой, будут трансформируется в одинарную кавычку-токен. При итерации по токенам необходимо проверить, является ли токен одинарной кавычкой, и рассматривать его как пустую строку.

не очень, но это работает, пока в кавычках нет новых строк.


вы можете посмотреть на мой проект FOSS CSVfix (обновили ссылку), который является редактором потока CSV, написанным на C++. Парсер CSV не является призом, но выполняет работу, и весь пакет может делать то, что вам нужно, без написания кода.

посмотреть alib/src / a_csv.cpp для парсера CSV и csvlib/src / csved_ioman.cpp (IOManager::ReadCSV) пример использования.


поскольку все вопросы CSV, похоже, перенаправляются сюда, я думал, что опубликую свой ответ здесь. Этот ответ не касается непосредственно вопроса спрашивающего. Я хотел иметь возможность читать в потоке, который, как известно, находится в формате CSV, а также типы каждого поля уже известны. Конечно, метод ниже может использоваться для обработки каждого поля как строкового типа.

в качестве примера того, как я хотел бы использовать входной поток CSV, рассмотрим следующий ввод (взятый из страница Википедии на CSV):

const char input[] =
"Year,Make,Model,Description,Price\n"
"1997,Ford,E350,\"ac, abs, moon\",3000.00\n"
"1999,Chevy,\"Venture \"\"Extended Edition\"\"\",\"\",4900.00\n"
"1999,Chevy,\"Venture \"\"Extended Edition, Very Large\"\"\",\"\",5000.00\n"
"1996,Jeep,Grand Cherokee,\"MUST SELL!\n\
air, moon roof, loaded\",4799.00\n"
;

затем я хотел иметь возможность читать в данных, как это:

std::istringstream ss(input);
std::string title[5];
int year;
std::string make, model, desc;
float price;
csv_istream(ss)
    >> title[0] >> title[1] >> title[2] >> title[3] >> title[4];
while (csv_istream(ss)
       >> year >> make >> model >> desc >> price) {
    //...do something with the record...
}

Это было решение, которое я получил.

struct csv_istream {
    std::istream &is_;
    csv_istream (std::istream &is) : is_(is) {}
    void scan_ws () const {
        while (is_.good()) {
            int c = is_.peek();
            if (c != ' ' && c != '\t') break;
            is_.get();
        }
    }
    void scan (std::string *s = 0) const {
        std::string ws;
        int c = is_.get();
        if (is_.good()) {
            do {
                if (c == ',' || c == '\n') break;
                if (s) {
                    ws += c;
                    if (c != ' ' && c != '\t') {
                        *s += ws;
                        ws.clear();
                    }
                }
                c = is_.get();
            } while (is_.good());
            if (is_.eof()) is_.clear();
        }
    }
    template <typename T, bool> struct set_value {
        void operator () (std::string in, T &v) const {
            std::istringstream(in) >> v;
        }
    };
    template <typename T> struct set_value<T, true> {
        template <bool SIGNED> void convert (std::string in, T &v) const {
            if (SIGNED) v = ::strtoll(in.c_str(), 0, 0);
            else v = ::strtoull(in.c_str(), 0, 0);
        }
        void operator () (std::string in, T &v) const {
            convert<is_signed_int<T>::val>(in, v);
        }
    };
    template <typename T> const csv_istream & operator >> (T &v) const {
        std::string tmp;
        scan(&tmp);
        set_value<T, is_int<T>::val>()(tmp, v);
        return *this;
    }
    const csv_istream & operator >> (std::string &v) const {
        v.clear();
        scan_ws();
        if (is_.peek() != '"') scan(&v);
        else {
            std::string tmp;
            is_.get();
            std::getline(is_, tmp, '"');
            while (is_.peek() == '"') {
                v += tmp;
                v += is_.get();
                std::getline(is_, tmp, '"');
            }
            v += tmp;
            scan();
        }
        return *this;
    }
    template <typename T>
    const csv_istream & operator >> (T &(*manip)(T &)) const {
        is_ >> manip;
        return *this;
    }
    operator bool () const { return !is_.fail(); }
};

со следующими помощниками, которые могут быть упрощены новыми шаблонами интегральных признаков в C++11:

template <typename T> struct is_signed_int { enum { val = false }; };
template <> struct is_signed_int<short> { enum { val = true}; };
template <> struct is_signed_int<int> { enum { val = true}; };
template <> struct is_signed_int<long> { enum { val = true}; };
template <> struct is_signed_int<long long> { enum { val = true}; };

template <typename T> struct is_unsigned_int { enum { val = false }; };
template <> struct is_unsigned_int<unsigned short> { enum { val = true}; };
template <> struct is_unsigned_int<unsigned int> { enum { val = true}; };
template <> struct is_unsigned_int<unsigned long> { enum { val = true}; };
template <> struct is_unsigned_int<unsigned long long> { enum { val = true}; };

template <typename T> struct is_int {
    enum { val = (is_signed_int<T>::val || is_unsigned_int<T>::val) };
};

другую библиотеку ввода-вывода CSV можно найти здесь:

http://code.google.com/p/fast-cpp-csv-parser/

#include "csv.h"

int main(){
  io::CSVReader<3> in("ram.csv");
  in.read_header(io::ignore_extra_column, "vendor", "size", "speed");
  std::string vendor; int size; double speed;
  while(in.read_row(vendor, size, speed)){
    // do stuff with the data
  }
}

другое решение, аналогичное ответ Локи Астари в C++11. Строки здесь std::tuples данного типа. Код сканирует одну строку, затем сканирует до каждого разделителя, а затем преобразует и сбрасывает значение непосредственно в кортеж (с небольшим количеством кода шаблона).

for (auto row : csv<std::string, int, float>(file, ',')) {
    std::cout << "first col: " << std::get<0>(row) << std::endl;
}

Advanges:

  • довольно чистый и простой в использовании, только в C++11.
  • автоматическое преобразование типов в std::tuple<t1, ...> через operator>>.

чего не хватает:

  • побег и цитируешь
  • нет обработки ошибок в случае искаженного CSV.

основной код:

#include <iterator>
#include <sstream>
#include <string>

namespace csvtools {
    /// Read the last element of the tuple without calling recursively
    template <std::size_t idx, class... fields>
    typename std::enable_if<idx >= std::tuple_size<std::tuple<fields...>>::value - 1>::type
    read_tuple(std::istream &in, std::tuple<fields...> &out, const char delimiter) {
        std::string cell;
        std::getline(in, cell, delimiter);
        std::stringstream cell_stream(cell);
        cell_stream >> std::get<idx>(out);
    }

    /// Read the @p idx-th element of the tuple and then calls itself with @p idx + 1 to
    /// read the next element of the tuple. Automatically falls in the previous case when
    /// reaches the last element of the tuple thanks to enable_if
    template <std::size_t idx, class... fields>
    typename std::enable_if<idx < std::tuple_size<std::tuple<fields...>>::value - 1>::type
    read_tuple(std::istream &in, std::tuple<fields...> &out, const char delimiter) {
        std::string cell;
        std::getline(in, cell, delimiter);
        std::stringstream cell_stream(cell);
        cell_stream >> std::get<idx>(out);
        read_tuple<idx + 1, fields...>(in, out, delimiter);
    }
}

/// Iterable csv wrapper around a stream. @p fields the list of types that form up a row.
template <class... fields>
class csv {
    std::istream &_in;
    const char _delim;
public:
    typedef std::tuple<fields...> value_type;
    class iterator;

    /// Construct from a stream.
    inline csv(std::istream &in, const char delim) : _in(in), _delim(delim) {}

    /// Status of the underlying stream
    /// @{
    inline bool good() const {
        return _in.good();
    }
    inline const std::istream &underlying_stream() const {
        return _in;
    }
    /// @}

    inline iterator begin();
    inline iterator end();
private:

    /// Reads a line into a stringstream, and then reads the line into a tuple, that is returned
    inline value_type read_row() {
        std::string line;
        std::getline(_in, line);
        std::stringstream line_stream(line);
        std::tuple<fields...> retval;
        csvtools::read_tuple<0, fields...>(line_stream, retval, _delim);
        return retval;
    }
};

/// Iterator; just calls recursively @ref csv::read_row and stores the result.
template <class... fields>
class csv<fields...>::iterator {
    csv::value_type _row;
    csv *_parent;
public:
    typedef std::input_iterator_tag iterator_category;
    typedef csv::value_type         value_type;
    typedef std::size_t             difference_type;
    typedef csv::value_type *       pointer;
    typedef csv::value_type &       reference;

    /// Construct an empty/end iterator
    inline iterator() : _parent(nullptr) {}
    /// Construct an iterator at the beginning of the @p parent csv object.
    inline iterator(csv &parent) : _parent(parent.good() ? &parent : nullptr) {
        ++(*this);
    }

    /// Read one row, if possible. Set to end if parent is not good anymore.
    inline iterator &operator++() {
        if (_parent != nullptr) {
            _row = _parent->read_row();
            if (!_parent->good()) {
                _parent = nullptr;
            }
        }
        return *this;
    }

    inline iterator operator++(int) {
        iterator copy = *this;
        ++(*this);
        return copy;
    }

    inline csv::value_type const &operator*() const {
        return _row;
    }

    inline csv::value_type const *operator->() const {
        return &_row;
    }

    bool operator==(iterator const &other) {
        return (this == &other) or (_parent == nullptr and other._parent == nullptr);
    }
    bool operator!=(iterator const &other) {
        return not (*this == other);
    }
};

template <class... fields>
typename csv<fields...>::iterator csv<fields...>::begin() {
    return iterator(*this);
}

template <class... fields>
typename csv<fields...>::iterator csv<fields...>::end() {
    return iterator();
}

я поставил крошечный рабочий пример на GitHub; я использовал его для анализа некоторых числовых данных, и он служил своей цели.


вот еще одна реализация синтаксического анализатора CSV Unicode (работает с wchar_t). Я написал часть, а Джонатан Леффлер-остальное.

Примечание: этот парсер предназначен для репликации поведения Excel как можно ближе, особенно при импорте сломанный или деформированный CSV-файлов.

это первоначальный вопрос -разбор CSV-файла с многострочными полями и экранированными двойными кавычками

Это код как SSCCE (Короткий, Самодостаточный, Правильный Пример).

#include <stdbool.h>
#include <wchar.h>
#include <wctype.h>

extern const wchar_t *nextCsvField(const wchar_t *p, wchar_t sep, bool *newline);

// Returns a pointer to the start of the next field,
// or zero if this is the last field in the CSV
// p is the start position of the field
// sep is the separator used, i.e. comma or semicolon
// newline says whether the field ends with a newline or with a comma
const wchar_t *nextCsvField(const wchar_t *p, wchar_t sep, bool *newline)
{
    // Parse quoted sequences
    if ('"' == p[0]) {
        p++;
        while (1) {
            // Find next double-quote
            p = wcschr(p, L'"');
            // If we don't find it or it's the last symbol
            // then this is the last field
            if (!p || !p[1])
                return 0;
            // Check for "", it is an escaped double-quote
            if (p[1] != '"')
                break;
            // Skip the escaped double-quote
            p += 2;
        }
    }

    // Find next newline or comma.
    wchar_t newline_or_sep[4] = L"\n\r ";
    newline_or_sep[2] = sep;
    p = wcspbrk(p, newline_or_sep);

    // If no newline or separator, this is the last field.
    if (!p)
        return 0;

    // Check if we had newline.
    *newline = (p[0] == '\r' || p[0] == '\n');

    // Handle "\r\n", otherwise just increment
    if (p[0] == '\r' && p[1] == '\n')
        p += 2;
    else
        p++;

    return p;
}

static wchar_t *csvFieldData(const wchar_t *fld_s, const wchar_t *fld_e, wchar_t *buffer, size_t buflen)
{
    wchar_t *dst = buffer;
    wchar_t *end = buffer + buflen - 1;
    const wchar_t *src = fld_s;

    if (*src == L'"')
    {
        const wchar_t *p = src + 1;
        while (p < fld_e && dst < end)
        {
            if (p[0] == L'"' && p+1 < fld_s && p[1] == L'"')
            {
                *dst++ = p[0];
                p += 2;
            }
            else if (p[0] == L'"')
            {
                p++;
                break;
            }
            else
                *dst++ = *p++;
        }
        src = p;
    }
    while (src < fld_e && dst < end)
        *dst++ = *src++;
    if (dst >= end)
        return 0;
    *dst = L'';
    return(buffer);
}

static void dissect(const wchar_t *line)
{
    const wchar_t *start = line;
    const wchar_t *next;
    bool     eol;
    wprintf(L"Input %3zd: [%.*ls]\n", wcslen(line), wcslen(line)-1, line);
    while ((next = nextCsvField(start, L',', &eol)) != 0)
    {
        wchar_t buffer[1024];
        wprintf(L"Raw Field: [%.*ls] (eol = %d)\n", (next - start - eol), start, eol);
        if (csvFieldData(start, next-1, buffer, sizeof(buffer)/sizeof(buffer[0])) != 0)
            wprintf(L"Field %3zd: [%ls]\n", wcslen(buffer), buffer);
        start = next;
    }
}

static const wchar_t multiline[] =
   L"First field of first row,\"This field is multiline\n"
    "\n"
    "but that's OK because it's enclosed in double quotes, and this\n"
    "is an escaped \"\" double quote\" but this one \"\" is not\n"
    "   \"This is second field of second row, but it is not multiline\n"
    "   because it doesn't start \n"
    "   with an immediate double quote\"\n"
    ;

int main(void)
{
    wchar_t line[1024];

    while (fgetws(line, sizeof(line)/sizeof(line[0]), stdin))
        dissect(line);
    dissect(multiline);

    return 0;
}

первое, что вам нужно сделать, это убедиться, что файл существует. Выполнять это вам просто нужно попробовать и открыть поток файлов по пути. После вас открыли файловый поток use stream.fail (), чтобы увидеть, работает ли он так, как ожидалось, или нет.

bool fileExists(string fileName)
{

ifstream test;

test.open(fileName.c_str());

if (test.fail())
{
    test.close();
    return false;
}
else
{
    test.close();
    return true;
}
}

вы также должны убедиться, что предоставленный файл является правильным типом файла. Для этого вам нужно посмотреть путь к файлу, пока вы найдете расширение файла. Как только у вас будет расширение файла, убедитесь что Это.CSV-файл.

bool verifyExtension(string filename)
{
int period = 0;

for (unsigned int i = 0; i < filename.length(); i++)
{
    if (filename[i] == '.')
        period = i;
}

string extension;

for (unsigned int i = period; i < filename.length(); i++)
    extension += filename[i];

if (extension == ".csv")
    return true;
else
    return false;
}

эта функция возвращает расширение файла, которое будет использоваться позже в сообщении об ошибке.

string getExtension(string filename)
{
int period = 0;

for (unsigned int i = 0; i < filename.length(); i++)
{
    if (filename[i] == '.')
        period = i;
}

string extension;

if (period != 0)
{
    for (unsigned int i = period; i < filename.length(); i++)
        extension += filename[i];
}
else
    extension = "NO FILE";

return extension;
}

эта функция фактически вызовет проверки ошибок, созданные выше, а затем проанализирует файл.

void parseFile(string fileName)
{
    if (fileExists(fileName) && verifyExtension(fileName))
    {
        ifstream fs;
        fs.open(fileName.c_str());
        string fileCommand;

        while (fs.good())
        {
            string temp;

            getline(fs, fileCommand, '\n');

            for (unsigned int i = 0; i < fileCommand.length(); i++)
            {
                if (fileCommand[i] != ',')
                    temp += fileCommand[i];
                else
                    temp += " ";
            }

            if (temp != "")
            {
                // Place your code here to run the file.
            }
        }
        fs.close();
    }
    else if (!fileExists(fileName))
    {
        cout << "Error: The provided file does not exist: " << fileName << endl;

        if (!verifyExtension(fileName))
        {
            if (getExtension(fileName) != "NO FILE")
                cout << "\tCheck the file extension." << endl;
            else
                cout << "\tThere is no file in the provided path." << endl;
        }
    }
    else if (!verifyExtension(fileName)) 
    {
        if (getExtension(fileName) != "NO FILE")
            cout << "Incorrect file extension provided: " << getExtension(fileName) << endl;
        else
            cout << "There is no file in the following path: " << fileName << endl;
    }
}

Я написал только заголовок, C++11 CSV parser. Он хорошо протестирован, быстрый, поддерживает всю спецификацию CSV (поля кавычек, разделитель/Терминатор в кавычках, экранирование цитат и т. д.), и настраивается для учета CSV, которые не соответствуют спецификации.

конфигурация сделана через Свободный интерфейс:

// constructor accepts any input stream
CsvParser parser = CsvParser(std::cin)
  .delimiter(';')    // delimited by ; instead of ,
  .quote('\'')       // quoted fields use ' instead of "
  .terminator(''); // terminated by  instead of by \r\n, \n, or \r

парсинг-это просто диапазон, основанный на цикле:

#include <iostream>
#include "../parser.hpp"

using namespace aria::csv;

int main() {
  std::ifstream f("some_file.csv");
  CsvParser parser(f);

  for (auto& row : parser) {
    for (auto& field : row) {
      std::cout << field << " | ";
    }
    std::cout << std::endl;
  }
}

Извините, но все это кажется очень сложным синтаксисом, чтобы скрыть несколько строк кода.

почему бы и нет:

/**

  Read line from a CSV file

  @param[in] fp file pointer to open file
  @param[in] vls reference to vector of strings to hold next line

  */
void readCSV( FILE *fp, std::vector<std::string>& vls )
{
    vls.clear();
    if( ! fp )
        return;
    char buf[10000];
    if( ! fgets( buf,999,fp) )
        return;
    std::string s = buf;
    int p,q;
    q = -1;
    // loop over columns
    while( 1 ) {
        p = q;
        q = s.find_first_of(",\n",p+1);
        if( q == -1 ) 
            break;
        vls.push_back( s.substr(p+1,q-p-1) );
    }
}

int _tmain(int argc, _TCHAR* argv[])
{
    std::vector<std::string> vls;
    FILE * fp = fopen( argv[1], "r" );
    if( ! fp )
        return 1;
    readCSV( fp, vls );
    readCSV( fp, vls );
    readCSV( fp, vls );
    std::cout << "row 3, col 4 is " << vls[3].c_str() << "\n";

    return 0;
}

вот код для чтения матрицы, обратите внимание, что у вас также есть функция csvwrite в matlab

void loadFromCSV( const std::string& filename )
{
    std::ifstream       file( filename.c_str() );
    std::vector< std::vector<std::string> >   matrix;
    std::vector<std::string>   row;
    std::string                line;
    std::string                cell;

    while( file )
    {
        std::getline(file,line);
        std::stringstream lineStream(line);
        row.clear();

        while( std::getline( lineStream, cell, ',' ) )
            row.push_back( cell );

        if( !row.empty() )
            matrix.push_back( row );
    }

    for( int i=0; i<int(matrix.size()); i++ )
    {
        for( int j=0; j<int(matrix[i].size()); j++ )
            std::cout << matrix[i][j] << " ";

        std::cout << std::endl;
    }
}

Вы можете открыть и прочитать .csv-файл с использованием функций fopen, fscanf, но важно проанализировать данные.Самый простой способ проанализировать данные с помощью разделителя.На всякий случай .csv, разделитель','.

предположим, что ваш data1.CSV-файл выглядит следующим образом :

A,45,76,01
B,77,67,02
C,63,76,03
D,65,44,04

вы можете токенизировать данные и хранить в массиве char, а затем использовать функцию atoi() etc для соответствующих преобразований

FILE *fp;
char str1[10], str2[10], str3[10], str4[10];

fp = fopen("G:\data1.csv", "r");
if(NULL == fp)
{
    printf("\nError in opening file.");
    return 0;
}
while(EOF != fscanf(fp, " %[^,], %[^,], %[^,], %s, %s, %s, %s ", str1, str2, str3, str4))
{
    printf("\n%s %s %s %s", str1, str2, str3, str4);
}
fclose(fp);

[^,], ^ -Он инвертирует логику, означает соответствие любой строке, которая не содержит запятую, затем последний, говорит, чтобы соответствовать запятая, которая завершила предыдущую строку.


вы должны гордиться, когда вы используете что-то настолько красивое, как boost::spirit

вот моя попытка парсера (почти), соответствующего спецификациям CSV по этой ссылке CSV в спецификации (мне не нужны разрывы строк в полях. Также удаляются пробелы вокруг запятых).

после того, как вы преодолеете шокирующий опыт ожидания 10 секунд для компиляции этого кода :), Вы можете сесть и наслаждаться.

// csvparser.cpp
#include <boost/spirit/include/qi.hpp>
#include <boost/spirit/include/phoenix_operator.hpp>

#include <iostream>
#include <string>

namespace qi = boost::spirit::qi;
namespace bascii = boost::spirit::ascii;

template <typename Iterator>
struct csv_parser : qi::grammar<Iterator, std::vector<std::string>(), 
    bascii::space_type>
{
    qi::rule<Iterator, char()                                           > COMMA;
    qi::rule<Iterator, char()                                           > DDQUOTE;
    qi::rule<Iterator, std::string(),               bascii::space_type  > non_escaped;
    qi::rule<Iterator, std::string(),               bascii::space_type  > escaped;
    qi::rule<Iterator, std::string(),               bascii::space_type  > field;
    qi::rule<Iterator, std::vector<std::string>(),  bascii::space_type  > start;

    csv_parser() : csv_parser::base_type(start)
    {
        using namespace qi;
        using qi::lit;
        using qi::lexeme;
        using bascii::char_;

        start       = field % ',';
        field       = escaped | non_escaped;
        escaped     = lexeme['"' >> *( char_ -(char_('"') | ',') | COMMA | DDQUOTE)  >> '"'];
        non_escaped = lexeme[       *( char_ -(char_('"') | ',')                  )        ];
        DDQUOTE     = lit("\"\"")       [_val = '"'];
        COMMA       = lit(",")          [_val = ','];
    }

};

int main()
{
    std::cout << "Enter CSV lines [empty] to quit\n";

    using bascii::space;
    typedef std::string::const_iterator iterator_type;
    typedef csv_parser<iterator_type> csv_parser;

    csv_parser grammar;
    std::string str;
    int fid;
    while (getline(std::cin, str))
    {
        fid = 0;

        if (str.empty())
            break;

        std::vector<std::string> csv;
        std::string::const_iterator it_beg = str.begin();
        std::string::const_iterator it_end = str.end();
        bool r = phrase_parse(it_beg, it_end, grammar, space, csv);

        if (r && it_beg == it_end)
        {
            std::cout << "Parsing succeeded\n";
            for (auto& field: csv)
            {
                std::cout << "field " << ++fid << ": " << field << std::endl;
            }
        }
        else
        {
            std::cout << "Parsing failed\n";
        }
    }

    return 0;
}

Compile:

make csvparser

тест (пример украден из Википедия):

./csvparser
Enter CSV lines [empty] to quit

1999,Chevy,"Venture ""Extended Edition, Very Large""",,5000.00
Parsing succeeded
field 1: 1999
field 2: Chevy
field 3: Venture "Extended Edition, Very Large"
field 4: 
field 5: 5000.00

1999,Chevy,"Venture ""Extended Edition, Very Large""",,5000.00"
Parsing failed

это решение обнаруживает эти 4 случая

полный класс составляет

https://github.com/pedro-vicente/csv-parser

1,field 2,field 3,
1,field 2,"field 3 quoted, with separator",
1,field 2,"field 3
with newline",
1,field 2,"field 3
with newline and separator,",

Он читает файл посимвольно, и читает 1 строку в вектор (строк), поэтому подходит для очень больших файлов.

использование

итерировать до пустой строки возвращается (конец файла). Подряд-это вектор, где каждая запись-это CSV колонна.

read_csv_t csv;
csv.open("../test.csv");
std::vector<std::string> row;
while (true)
{
  row = csv.read_row();
  if (row.size() == 0)
  {
    break;
  }
}

объявление класса

class read_csv_t
{
public:
  read_csv_t();
  int open(const std::string &file_name);
  std::vector<std::string> read_row();
private:
  std::ifstream m_ifs;
};

реализация

std::vector<std::string> read_csv_t::read_row()
{
  bool quote_mode = false;
  std::vector<std::string> row;
  std::string column;
  char c;
  while (m_ifs.get(c))
  {
    switch (c)
    {
      /////////////////////////////////////////////////////////////////////////////////////////////////////
      //separator ',' detected. 
      //in quote mode add character to column
      //push column if not in quote mode
      /////////////////////////////////////////////////////////////////////////////////////////////////////

    case ',':
      if (quote_mode == true)
      {
        column += c;
      }
      else
      {
        row.push_back(column);
        column.clear();
      }
      break;

      /////////////////////////////////////////////////////////////////////////////////////////////////////
      //quote '"' detected. 
      //toggle quote mode
      /////////////////////////////////////////////////////////////////////////////////////////////////////

    case '"':
      quote_mode = !quote_mode;
      break;

      /////////////////////////////////////////////////////////////////////////////////////////////////////
      //line end detected
      //in quote mode add character to column
      //return row if not in quote mode
      /////////////////////////////////////////////////////////////////////////////////////////////////////

    case '\n':
    case '\r':
      if (quote_mode == true)
      {
        column += c;
      }
      else
      {
        return row;
      }
      break;

      /////////////////////////////////////////////////////////////////////////////////////////////////////
      //default, add character to column
      /////////////////////////////////////////////////////////////////////////////////////////////////////

    default:
      column += c;
      break;
    }
  }

  //return empty vector if end of file detected 
  m_ifs.close();
  std::vector<std::string> v;
  return v;
}

вы также можете взглянуть на возможности Qt библиотека.

Он имеет поддержку регулярных выражений, А класс QString имеет хорошие методы, например split() возврат QStringList, списка строк, полученных путем разделения исходной строки с предоставленным разделителем. Должно хватить для CSV-файла..

чтобы получить столбец с именем заголовка я использую следующие: C++ наследование Qt проблема qstring


Если вы не хотите иметь дело с включением boost в свой проект (он значительно больше, если все, что вы собираетесь использовать его для CSV-анализа...)

Мне повезло с разбором CSV здесь:

http://www.zedwood.com/article/112/cpp-csv-parser

он обрабатывает поля с кавычками, но не обрабатывает встроенные символы \n (что, вероятно, хорошо для большинства применений).


Это старый поток, но он все еще находится в верхней части результатов поиска, поэтому я добавляю свое решение с помощью std::stringstream и простого метода замены строки Yves Baumes, который я нашел здесь.

в следующем примере будет читать файл строка за строкой, игнорировать строки комментариев, начинающиеся с//, и анализировать другие строки в комбинации строк, ints и Double. Stringstream выполняет синтаксический анализ, но ожидает, что поля будут разделены пробелами, поэтому я использую stringreplace для преобразования запятых в пространства в первую очередь. Он обрабатывает вкладки ок, но не имеет дело с кавычками.

плохой или отсутствующий ввод просто игнорируется, что может быть или не быть хорошим, в зависимости от ваших обстоятельств.

#include <string>
#include <sstream>
#include <fstream>

void StringReplace(std::string& str, const std::string& oldStr, const std::string& newStr)
// code by  Yves Baumes
// http://stackoverflow.com/questions/1494399/how-do-i-search-find-and-replace-in-a-standard-string
{
  size_t pos = 0;
  while((pos = str.find(oldStr, pos)) != std::string::npos)
  {
     str.replace(pos, oldStr.length(), newStr);
     pos += newStr.length();
  }
}

void LoadCSV(std::string &filename) {
   std::ifstream stream(filename);
   std::string in_line;
   std::string Field;
   std::string Chan;
   int ChanType;
   double Scale;
   int Import;
   while (std::getline(stream, in_line)) {
      StringReplace(in_line, ",", " ");
      std::stringstream line(in_line);
      line >> Field >> Chan >> ChanType >> Scale >> Import;
      if (Field.substr(0,2)!="//") {
         // do your stuff 
         // this is CBuilder code for demonstration, sorry
         ShowMessage((String)Field.c_str() + "\n" + Chan.c_str() + "\n" + IntToStr(ChanType) + "\n" +FloatToStr(Scale) + "\n" +IntToStr(Import));
      }
   }
}

для чего это стоит, вот моя реализация. Он имеет дело с вводом wstring, но может быть легко настроен на строку. Он не обрабатывает новую строку в полях (как и мое приложение, но добавление его поддержки не слишком сложно), и он не соответствует концу строки "\r\n" в соответствии с RFC (при условии, что вы используете std::getline), но он правильно обрабатывает обрезку пробелов и двойные кавычки (надеюсь).

using namespace std;

// trim whitespaces around field or double-quotes, remove double-quotes and replace escaped double-quotes (double double-quotes)
wstring trimquote(const wstring& str, const wstring& whitespace, const wchar_t quotChar)
{
    wstring ws;
    wstring::size_type strBegin = str.find_first_not_of(whitespace);
    if (strBegin == wstring::npos)
        return L"";

    wstring::size_type strEnd = str.find_last_not_of(whitespace);
    wstring::size_type strRange = strEnd - strBegin + 1;

    if((str[strBegin] == quotChar) && (str[strEnd] == quotChar))
    {
        ws = str.substr(strBegin+1, strRange-2);
        strBegin = 0;
        while((strEnd = ws.find(quotChar, strBegin)) != wstring::npos)
        {
            ws.erase(strEnd, 1);
            strBegin = strEnd+1;
        }

    }
    else
        ws = str.substr(strBegin, strRange);
    return ws;
}

pair<unsigned, unsigned> nextCSVQuotePair(const wstring& line, const wchar_t quotChar, unsigned ofs = 0)
{
    pair<unsigned, unsigned> r;
    r.first = line.find(quotChar, ofs);
    r.second = wstring::npos;
    if(r.first != wstring::npos)
    {
        r.second = r.first;
        while(((r.second = line.find(quotChar, r.second+1)) != wstring::npos)
            && (line[r.second+1] == quotChar)) // WARNING: assumes null-terminated string such that line[r.second+1] always exist
            r.second++;

    }
    return r;
}

unsigned parseLine(vector<wstring>& fields, const wstring& line)
{
    unsigned ofs, ofs0, np;
    const wchar_t delim = L',';
    const wstring whitespace = L" \t\xa0\x3000\x2000\x2001\x2002\x2003\x2004\x2005\x2006\x2007\x2008\x2009\x200a\x202f\x205f";
    const wchar_t quotChar = L'\"';
    pair<unsigned, unsigned> quot;

    fields.clear();

    ofs = ofs0 = 0;
    quot = nextCSVQuotePair(line, quotChar);
    while((np = line.find(delim, ofs)) != wstring::npos)
    {
        if((np > quot.first) && (np < quot.second))
        { // skip delimiter inside quoted field
            ofs = quot.second+1;
            quot = nextCSVQuotePair(line, quotChar, ofs);
            continue;
        }
        fields.push_back( trimquote(line.substr(ofs0, np-ofs0), whitespace, quotChar) );
        ofs = ofs0 = np+1;
    }
    fields.push_back( trimquote(line.substr(ofs0), whitespace, quotChar) );

    return fields.size();
}

вот готовая к использованию функция, если все, что вам нужно, это загрузить файл данных двойников (без целых чисел, без текста).

#include <sstream>
#include <fstream>
#include <iterator>
#include <string>
#include <vector>
#include <algorithm>

using namespace std;

/**
 * Parse a CSV data file and fill the 2d STL vector "data".
 * Limits: only "pure datas" of doubles, not encapsulated by " and without \n inside.
 * Further no formatting in the data (e.g. scientific notation)
 * It however handles both dots and commas as decimal separators and removes thousand separator.
 * 
 * returnCodes[0]: file access 0-> ok 1-> not able to read; 2-> decimal separator equal to comma separator
 * returnCodes[1]: number of records
 * returnCodes[2]: number of fields. -1 If rows have different field size
 * 
 */
vector<int>
readCsvData (vector <vector <double>>& data, const string& filename, const string& delimiter, const string& decseparator){

 int vv[3] = { 0,0,0 };
 vector<int> returnCodes(&vv[0], &vv[0]+3);

 string rowstring, stringtoken;
 double doubletoken;
 int rowcount=0;
 int fieldcount=0;
 data.clear();

 ifstream iFile(filename, ios_base::in);
 if (!iFile.is_open()){
   returnCodes[0] = 1;
   return returnCodes;
 }
 while (getline(iFile, rowstring)) {
    if (rowstring=="") continue; // empty line
    rowcount ++; //let's start with 1
    if(delimiter == decseparator){
      returnCodes[0] = 2;
      return returnCodes;
    }
    if(decseparator != "."){
     // remove dots (used as thousand separators)
     string::iterator end_pos = remove(rowstring.begin(), rowstring.end(), '.');
     rowstring.erase(end_pos, rowstring.end());
     // replace decimal separator with dots.
     replace(rowstring.begin(), rowstring.end(),decseparator.c_str()[0], '.'); 
    } else {
     // remove commas (used as thousand separators)
     string::iterator end_pos = remove(rowstring.begin(), rowstring.end(), ',');
     rowstring.erase(end_pos, rowstring.end());
    }
    // tokenize..
    vector<double> tokens;
    // Skip delimiters at beginning.
    string::size_type lastPos = rowstring.find_first_not_of(delimiter, 0);
    // Find first "non-delimiter".
    string::size_type pos     = rowstring.find_first_of(delimiter, lastPos);
    while (string::npos != pos || string::npos != lastPos){
        // Found a token, convert it to double add it to the vector.
        stringtoken = rowstring.substr(lastPos, pos - lastPos);
        if (stringtoken == "") {
      tokens.push_back(0.0);
    } else {
          istringstream totalSString(stringtoken);
      totalSString >> doubletoken;
      tokens.push_back(doubletoken);
    }     
        // Skip delimiters.  Note the "not_of"
        lastPos = rowstring.find_first_not_of(delimiter, pos);
        // Find next "non-delimiter"
        pos = rowstring.find_first_of(delimiter, lastPos);
    }
    if(rowcount == 1){
      fieldcount = tokens.size();
      returnCodes[2] = tokens.size();
    } else {
      if ( tokens.size() != fieldcount){
    returnCodes[2] = -1;
      }
    }
    data.push_back(tokens);
 }
 iFile.close();
 returnCodes[1] = rowcount;
 return returnCodes;
}

еще один быстрый и простой способ-использовать Boost.Fusion I/O:

#include <iostream>
#include <sstream>

#include <boost/fusion/adapted/boost_tuple.hpp>
#include <boost/fusion/sequence/io.hpp>

namespace fusion = boost::fusion;

struct CsvString
{
    std::string value;

    // Stop reading a string once a CSV delimeter is encountered.
    friend std::istream& operator>>(std::istream& s, CsvString& v) {
        v.value.clear();
        for(;;) {
            auto c = s.peek();
            if(std::istream::traits_type::eof() == c || ',' == c || '\n' == c)
                break;
            v.value.push_back(c);
            s.get();
        }
        return s;
    }

    friend std::ostream& operator<<(std::ostream& s, CsvString const& v) {
        return s << v.value;
    }
};

int main() {
    std::stringstream input("abc,123,true,3.14\n"
                            "def,456,false,2.718\n");

    typedef boost::tuple<CsvString, int, bool, double> CsvRow;

    using fusion::operator<<;
    std::cout << std::boolalpha;

    using fusion::operator>>;
    input >> std::boolalpha;
    input >> fusion::tuple_open("") >> fusion::tuple_close("\n") >> fusion::tuple_delimiter(',');

    for(CsvRow row; input >> row;)
        std::cout << row << '\n';
}

выходы:

(abc 123 true 3.14)
(def 456 false 2.718)

Я написал хороший способ разбора CSV-файлов, и я подумал, что должен добавить его в качестве ответа:

#include <algorithm>
#include <fstream>
#include <iostream>
#include <stdlib.h>
#include <stdio.h>

struct CSVDict
{
  std::vector< std::string > inputImages;
  std::vector< double > inputLabels;
};

/**
\brief Splits the string

\param str String to split
\param delim Delimiter on the basis of which splitting is to be done
\return results Output in the form of vector of strings
*/
std::vector<std::string> stringSplit( const std::string &str, const std::string &delim )
{
  std::vector<std::string> results;

  for (size_t i = 0; i < str.length(); i++)
  {
    std::string tempString = "";
    while ((str[i] != *delim.c_str()) && (i < str.length()))
    {
      tempString += str[i];
      i++;
    }
    results.push_back(tempString);
  }

  return results;
}

/**
\brief Parse the supplied CSV File and obtain Row and Column information. 

Assumptions:
1. Header information is in first row
2. Delimiters are only used to differentiate cell members

\param csvFileName The full path of the file to parse
\param inputColumns The string of input columns which contain the data to be used for further processing
\param inputLabels The string of input labels based on which further processing is to be done
\param delim The delimiters used in inputColumns and inputLabels
\return Vector of Vector of strings: Collection of rows and columns
*/
std::vector< CSVDict > parseCSVFile( const std::string &csvFileName, const std::string &inputColumns, const std::string &inputLabels, const std::string &delim )
{
  std::vector< CSVDict > return_CSVDict;
  std::vector< std::string > inputColumnsVec = stringSplit(inputColumns, delim), inputLabelsVec = stringSplit(inputLabels, delim);
  std::vector< std::vector< std::string > > returnVector;
  std::ifstream inFile(csvFileName.c_str());
  int row = 0;
  std::vector< size_t > inputColumnIndeces, inputLabelIndeces;
  for (std::string line; std::getline(inFile, line, '\n');)
  {
    CSVDict tempDict;
    std::vector< std::string > rowVec;
    line.erase(std::remove(line.begin(), line.end(), '"'), line.end());
    rowVec = stringSplit(line, delim);

    // for the first row, record the indeces of the inputColumns and inputLabels
    if (row == 0)
    {
      for (size_t i = 0; i < rowVec.size(); i++)
      {
        for (size_t j = 0; j < inputColumnsVec.size(); j++)
        {
          if (rowVec[i] == inputColumnsVec[j])
          {
            inputColumnIndeces.push_back(i);
          }
        }
        for (size_t j = 0; j < inputLabelsVec.size(); j++)
        {
          if (rowVec[i] == inputLabelsVec[j])
          {
            inputLabelIndeces.push_back(i);
          }
        }
      }
    }
    else
    {
      for (size_t i = 0; i < inputColumnIndeces.size(); i++)
      {
        tempDict.inputImages.push_back(rowVec[inputColumnIndeces[i]]);
      }
      for (size_t i = 0; i < inputLabelIndeces.size(); i++)
      {
        double test = std::atof(rowVec[inputLabelIndeces[i]].c_str());
        tempDict.inputLabels.push_back(std::atof(rowVec[inputLabelIndeces[i]].c_str()));
      }
      return_CSVDict.push_back(tempDict);
    }
    row++;
  }

  return return_CSVDict;
}

можно использовать std::regex .

в зависимости от размера вашего файла и доступной вам памяти, можно прочитать его либо строка за строкой, либо полностью в std::string.

до прочитать файл можно использовать :

std::ifstream t("file.txt");
std::string sin((std::istreambuf_iterator<char>(t)),
                 std::istreambuf_iterator<char>());

тогда вы можете соответствовать этому, который на самом деле настраивается для ваших нужд.

std::regex word_regex(",\s]+");
auto what = 
    std::sregex_iterator(sin.begin(), sin.end(), word_regex);
auto wend = std::sregex_iterator();

std::vector<std::string> v;
for (;what!=wend ; wend) {
    std::smatch match = *what;
    v.push_back(match.str());
}

поскольку я не привык к повышению прямо сейчас, я предложу более простое решение. Предположим, что ваш .csv-файл имеет 100 строк с 10 номерами в каждой строке, разделенными",". Вы можете загрузить эти данные в виде массива со следующим кодом:

#include <iostream>
#include <fstream>
#include <sstream>
#include <string>
using namespace std;

int main()
{
    int A[100][10];
    ifstream ifs;
    ifs.open("name_of_file.csv");
    string s1;
    char c;
    for(int k=0; k<100; k++)
    {
        getline(ifs,s1);
        stringstream stream(s1);
        int j=0;
        while(1)
        {
            stream >>A[k][j];
            stream >> c;
            j++;
            if(!stream) {break;}
        }
    }


}

Мне нужна была простая в использовании библиотека C++ для синтаксического анализа CSV-файлов, но я не мог найти доступных, поэтому я закончил создание. Rapidcsv - это библиотека только для заголовков c++11, которая дает прямой доступ к анализируемым столбцам (или строкам) в качестве векторов в выбранном типе данных. Например:

#include <iostream>
#include <vector>
#include <rapidcsv.h>

int main()
{
  rapidcsv::Document doc("../tests/msft.csv");

  std::vector<float> close = doc.GetColumn<float>("Close");
  std::cout << "Read " << close.size() << " values." << std::endl;
}