Задание агента SQL: определите, как долго оно выполняется

/**** FOR CURRENTLY RUNNING JOBS ****/
SELECT j.name AS Job_Name,DATEDIFF(ss,a.start_execution_date ,GETDATE ())   
FROM msdb.dbo.sysjobactivity a INNER JOIN msdb.dbo.sysjobs j 
ON a.job_id =j.job_id
WHERE CONVERT(DATE,a.start_execution_date )=CONVERT(DATE,GETDATE ())
AND a.stop_execution_date IS NULL


/*This code will give u the Name of currently running jobs and for how much time it is running & after that u can add filters to it as u wish*/
/*Thanks in advance*/

то, что вы делаете вручную, похоже на то, что известно как "цикл сторожевой собаки". В принципе, задание SQL, которое запускает и / или отслеживает задания агента, убивая их, если это необходимо.

код ниже был взят отсюда, и должен помочь, удалив необходимость вручную контролировать и убивать задания, если они выполняются в течение длительного периода времени:

/****************************************************************
--This SQL will take a list of SQL Agent jobs (names must match),
--start them so they're all running together, and then
--monitor them, not quitting until all jobs have completed.
--
--In essence, it's an SQL "watchdog" loop to start and monitor SQL Agent Jobs
--
--Code from http://cc.davelozinski.com/code/sql-watchdog-loop-start-monitor-sql-agent-jobs
--
****************************************************************/
SET NOCOUNT ON 

-------- BEGIN ITEMS THAT NEED TO BE CONFIGURED --------

--The amount of time to wait before checking again 
--to see if the jobs are still running.
--Should be in hh:mm:ss format. 
DECLARE @WaitDelay VARCHAR(8) = '00:00:20'

--Job timeout. Eg, if the jobs are running longer than this, kill them.
DECLARE @TimeoutMinutes INT = 240

DECLARE @JobsToRunTable TABLE
(
    JobName NVARCHAR(128) NOT NULL,
    JobID UNIQUEIDENTIFIER NULL,
    Running INT NULL
)

--Insert the names of the SQL jobs here. Last two values should always be NULL at this point.
--Names need to match exactly, so best to copy/paste from the SQL Server Agent job name.
INSERT INTO @JobsToRunTable (JobName, JobID, Running) VALUES ('NameOfFirstSQLAgentJobToRun',NULL,NULL)
INSERT INTO @JobsToRunTable (JobName, JobID, Running) VALUES ('NameOfSecondSQLAgentJobToRun',NULL,NULL)
INSERT INTO @JobsToRunTable (JobName, JobID, Running) VALUES ('NameOfXSQLAgentJobToRun',NULL,NULL)

-------- NOTHING FROM HERE DOWN SHOULD NEED TO BE CONFIGURED --------

DECLARE @ExecutionStatusTable TABLE
(
    JobID UNIQUEIDENTIFIER PRIMARY KEY, -- Job ID which will be a guid
    LastRunDate INT, LastRunTime INT, -- Last run date and time
    NextRunDate INT, NextRunTime INT, -- Next run date and time
    NextRunScheduleID INT, -- an internal schedule id
    RequestedToRun INT, RequestSource INT, RequestSourceID VARCHAR(128),
    Running INT,    -- 0 or 1, 1 means the job is executing
    CurrentStep INT, -- which step is running
    CurrentRetryAttempt INT, -- retry attempt
    JobState INT -- 0 = Not idle or suspended, 1 = Executing, 2 = Waiting For Thread,
                     -- 3 = Between Retries, 4 = Idle, 5 = Suspended, 
                     -- 6 = WaitingForStepToFinish, 7 = PerformingCompletionActions
)

DECLARE @JobNameToRun NVARCHAR(128) = NULL
DECLARE @IsJobRunning BIT = 1
DECLARE @AreJobsRunning BIT = 1
DECLARE @job_owner sysname = SUSER_SNAME()
DECLARE @JobID UNIQUEIDENTIFIER = null
DECLARE @StartDateTime DATETIME = GETDATE()
DECLARE @CurrentDateTime DATETIME = null
DECLARE @ExecutionStatus INT = 0
DECLARE @MaxTimeExceeded BIT = 0

--Loop through and start every job
DECLARE dbCursor CURSOR FOR SELECT JobName FROM @JobsToRunTable
OPEN dbCursor FETCH NEXT FROM dbCursor INTO @JobNameToRun
WHILE @@FETCH_STATUS = 0
BEGIN
    EXEC [msdb].[dbo].sp_start_job @JobNameToRun
    FETCH NEXT FROM dbCursor INTO @JobNameToRun
END
CLOSE dbCursor
DEALLOCATE dbCursor

print '*****************************************************************'
print 'Jobs started. ' + CAST(@StartDateTime as varchar)
print '*****************************************************************'

--Debug (if needed)
--SELECT * FROM @JobsToRunTable

WHILE 1=1 AND @AreJobsRunning = 1
BEGIN

    --This has to be first with the delay to make sure the jobs
    --have time to actually start up and are recognized as 'running'
    WAITFOR DELAY @WaitDelay 

    --Reset for each loop iteration
    SET @AreJobsRunning = 0

    --Get the currently executing jobs by our user name
    INSERT INTO @ExecutionStatusTable
    EXECUTE [master].[dbo].xp_sqlagent_enum_jobs 1, @job_owner

    --Debug (if needed)
    --SELECT 'ExecutionStatusTable', * FROM @ExecutionStatusTable

    --select every job to see if it's running
    DECLARE dbCursor CURSOR FOR 
        SELECT x.[Running], x.[JobID], sj.name 
        FROM @ExecutionStatusTable x 
        INNER JOIN [msdb].[dbo].sysjobs sj ON sj.job_id = x.JobID
        INNER JOIN @JobsToRunTable jtr on sj.name = jtr.JobName
    OPEN dbCursor FETCH NEXT FROM dbCursor INTO @IsJobRunning, @JobID, @JobNameToRun

    --Debug (if needed)
    --SELECT x.[Running], x.[JobID], sj.name 
    --  FROM @ExecutionStatusTable x 
    --  INNER JOIN msdb.dbo.sysjobs sj ON sj.job_id = x.JobID
    --  INNER JOIN @JobsToRunTable jtr on sj.name = jtr.JobName

    WHILE @@FETCH_STATUS = 0
    BEGIN
        --bitwise operation to see if the loop should continue
        SET @AreJobsRunning = @AreJobsRunning | @IsJobRunning

        UPDATE @JobsToRunTable
        SET Running = @IsJobRunning, JobID = @JobID
        WHERE JobName = @JobNameToRun

        --Debug (if needed)
        --SELECT 'JobsToRun', * FROM @JobsToRunTable

        SET @CurrentDateTime=GETDATE()

        IF @IsJobRunning = 1
        BEGIN -- Job is running or finishing (not idle)

            IF DATEDIFF(mi, @StartDateTime, @CurrentDateTime) > @TimeoutMinutes
            BEGIN     
                print '*****************************************************************'
                print @JobNameToRun + ' exceeded timeout limit of ' + @TimeoutMinutes + ' minutes. Stopping.'
                --Stop the job
                EXEC [msdb].[dbo].sp_stop_job @job_name = @JobNameToRun
            END
            ELSE
            BEGIN
                print @JobNameToRun + ' running for ' + CONVERT(VARCHAR(25),DATEDIFF(mi, @StartDateTime, @CurrentDateTime)) + ' minute(s).'
            END
        END

        IF @IsJobRunning = 0 
        BEGIN
            --Job isn't running
            print '*****************************************************************'
            print @JobNameToRun + ' completed or did not run. ' + CAST(@CurrentDateTime as VARCHAR)
        END

        FETCH NEXT FROM dbCursor INTO @IsJobRunning, @JobID, @JobNameToRun

    END -- WHILE @@FETCH_STATUS = 0
    CLOSE dbCursor
    DEALLOCATE dbCursor

    --Clear out the table for the next loop iteration
    DELETE FROM @ExecutionStatusTable

    print '*****************************************************************'

END -- WHILE 1=1 AND @AreJobsRunning = 1

SET @CurrentDateTime = GETDATE()
print 'Finished at ' + CAST(@CurrentDateTime as varchar)
print CONVERT(VARCHAR(25),DATEDIFF(mi, @StartDateTime, @CurrentDateTime)) + ' minutes total run time.'